BXZJB - 1001595 OCTAGON OCC

  • MSDS: BXZJB
  • Manufacturer: OCTAGON PROCESS INC
  • Product Name: 1001595 OCTAGON OCC
  • National Stock Number: 6850-01-389-3880
Product Identification

Product ID:1001595 OCTAGON OCC
MSDS Date:03/23/1998
FSC:6850
NIIN:01-389-3880
MSDS Number: BXZJB

Responsible Party
OCTAGON PROCESS INC.
596 RIVER ROAD
EDGEWATER, NJ 07020-1105
US

Emergency Phone: 201-313-1187/800-424-9300(CHEMTREC)

Info Phone: 201-313-1187/FAX -1057

Preparer: J.J. BURGARD

Cage: 82925

Contractor
OCTAGON PROCESS INC.
EDGEWATER, NJ 07020 US

Telephone: 201-945-9400

Cage: 82925

Ingredients

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: NP

OSHA PEL NOT RELEVANT

ACGIH TLV: NOT RELEVANT


POLYSILICATE ANIONS

CAS: 1344-09-8

Fraction By Weight: 9.3-10%


SODIUM TETRAFLUOROBORATE

CAS: 13755-29-8

RTECS: ED2975000

Fraction By Weight: NP

OSHA PEL 2.5MG/M3 8 HRS TWA

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:WILL CAUSE
REDNESS,IRRIT,BURNS(11MILDER CASES WILL CAUSE SKIN RASH.ALSO WILL CAUSE COLD/CLAMMY SKIN
W/BLUISH OR PALE COLOR.INHAL:UNDER CERTAIN CONDITON S MAY CAUSE
BREATH DISCOMFORT SUCH AS SNEEZING,COUGHING,IRRIT.INGEST:WILL CAUSE
NAU,VOMIT,ABD PAIN.MAY CAUSE(SIGN/SYMPT)
Explanation of Carcinogenicity:PER MSDS:THIS PRODUCT CONTAINS
CARCINOGENS(NTP/IARC/OSHA):NO.
Effects of Overexposure:HEALTH:PAINFULL SWALLOW,PROFUSE
SALIVATION,BURNS OF MOUTH/ESOPAGUS,STOMACH,LOWER GI TRACT.AFT 96HRS
EXPO TO 5000PPM OF OCC 100% OF FETHEAD MINNOWS SURVIVED.
EEY-RED,IRRIT,BURNS.SKIN-SEVERE IRRIT,BURNS ,RASH,COLD/CLAMMY SKIN
W/BLUISH OR PLAECOLOR.INHAL-BREATH
DISCOFT-SNEEZE,COUGH,IRRIT.INGEST-NAU,VOMIT,ABD PAIN,BURNS
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND RESPIRATORY
CONDITIONS MAY BE AGGRAVATED.

First Aid

First Aid:EYE:FLOOD W/WATER FOR @LEAST 15MINS.IRIT OCCURS/PERSIST GET
MED ATTN.BURNS OCCUR WRAP IN DRY STERILE DRESSINGS & GET IMMED MED
ATTN.INHAL:MOVE TO FRESH AIR.BREATH DIFFI GIVE OXY;STOP BREATH
ADMIN ART RESP(MOUTH-TO-MOUTH PREFER)IF TRAINED.GET IMMED MED
ATTN.INGEST:DONT INDUCE VOMIT.VICTIM CONSC ADMIN 4-8OZ OF H2O TO
DILUTE STOMACH CONTENTS.RINSE MOUTH WELL.GET IMMED MED
ATTN.NOTE:11

Fire Fighting

Flash Point Method:TCC
Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:WATER SPRAY OR FOG, FOAM, DRY CHEMICAL, CO2.
Fire Fighting Procedures:KEEP FIRE-EXPO CONTAINERS COOL WITH WATER
SPRAY. WEAR CHEMICAL RESISTANT CLOTHING & NIOSH/MSHA-APPROVED
SCBA (AS RECOMMENDED BY NFPA).
Unusual Fire/Explosion Hazard:NONE .

Accidental Release

Spill Release Procedures:NEUTRALIZE SPILL W/DILUTE MURIATIC OR ACETIC
ACID,ABSORB W/INERT MATLS & PLACE INTO PROPER CNTNRS FOR
DISPO.COMPLY W/ALL SPILL NOTIFICATION REGS.ALL RESPONSE ACTIVITIES
MUST COMPLY W/HAZWOPER(REFER 29 CFR1910.120).
Neutralizing Agent:DILUTE MURIATIC OR ACETIC ACID

Handling

Handling and Storage Precautions:AVOID EYE/SKIN CONTACT & BREATH
VAPOR/MSIT.ALL USERS SHOULD CONSULT MSDS BEF HNDLG PRODUCT
(11Other Precautions:STORE IN COOL DRY PLACE.STORE AWAY FROM
ACIDS/OXIDIZERS.KEEP CNTNRS CLSD WHEN NOT IN USE.CLEAN ALL CONTAM
EQPMT BEF STARTING ANY REPAIR WORK.PROD NON-TOXIC;FOR USE IN ANY
LIFE SUPPORET SYSTEM INCLUDIN G MULTIPLE ATM DIVING SYSTEMS.

Exposure Controls

Respiratory Protection:IF PRODUCT IS HEATED ABOVE 200F,THE USE OF
NIOSH/MSHA-APPROVED RESPIRATORY PROTECTION IS RECOMMENDED.(REFER
29CFR1910.134).
Ventilation:LOC
EXHAUST-RECOMMENDED.MECHANICAL(GEN)-FAN.SPECIAL/OTHER-NA.USE FORCED
VENTI IF RESP DISCOMFT IS NOTED.
Protective Gloves:NEOPRENE,RUBBER OR PVC.
Eye Protection:USE FACE SHIELD.
Other Protective Equipment:ALWAYS USE EYE PROTECTION WHEN HANDLING
CHEMICALS. IF EXCESSIVE SPLASHING IS EXPECTED, USE A FACESHIELD &
RUBBER APRON DURING HANDLING. PROVIDE LOCAL EMERG SHOWERS & EYEWASH
STATIONS.
Work Hygienic Practices:AVOID EYE SKIN CONTACT AND BREATHING OF
VAPORS/MIST. ALL USER SHOULD CONTACT THE MSDS BEFORE HANDLING THIS
PRODUCT.
Supplemental Safety and Health
USE FORCED VENTILATION IF RESPIRATORY DISCOMFORT IS NOTED.

Chemical Properties

HCC:B3
Boiling Pt:B.P. Text:240F,116C
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:17MMHG
Vapor Density:0.4
Spec Gravity:1.099
pH:11-12
Viscosity:NP
Evaporation Rate & Reference:<1, ACETONE=1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR WATER-WHITE LIQUID,ODORLESS
Percent Volatiles by Volume:85%
Corrosion Rate:NP

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS
Stability Condition to Avoid:AVOID CONTACT WITH ACIDS.
Hazardous Decomposition Products:OXIDES OF SILICONE.

Disposal

Waste Disposal Methods:DISPOSE OF WASTE IN COMPLIANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.RECYCLE WASTE WHERE APPLICABLE.THIS PRODUCT
CONTAINS NO MATLS WHIHC ARE REGULATED UNDER SARA III SEC 313
SUPPLIER NOTIFICATION REQMTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.